Catalog
Industrial valves
Industrial valves
Butterfly valves
Butterfly valves
PTFE-lined butterfly valves of PA 200 series
Butterfly valves of PA 300 series
Butterfly valves with double offset of PA 400 series
Butterfly valves of PA 600 series
Butterfly valves with double offset of PA 700 series
Butterfly valves with tripple offset of PA 900 series
Gate valves
Gate valves
Knife gate valves with through knife of PA 510 series
Bidirectional knife gate valves of PA 520 series
Bidirectional knife gate valves with demountable body of PA 530 series
Unidirectional knife gate valves of PA 540 series
Bidirectional knife gate valves with internal rubber inserts of PA 550 series
Bidirectional knife gate valves with polyurethane seat of PA 560 series
Unidirectional knife gate valves for high pressure with blind body of PA 570 series
Pinch valves produced by PromArm
Gate valves 30с41нж of Promarm manufacturing
Other gate valves
Valves
Valves
Stop valves
Isolation valves
Safety valves
Diverter valves
Control valves
Mixing valves
Solenoid valves
Ball Valves
Check Valves
Screen filters
Electrically Actuated Industrial Valves
Electrically Actuated Industrial Valves
Electrically actuated gate valves
Electrically actuated butterfly valves
Electrically actuated ball valves
Electrically actuated ball valves
Power Industry Valves
Other industrial valves
Other industrial valves
Steam traps
Pressure and level regulators
Tempering valves
X-mas tree valves and wellhead equipment
Pinch valves
Electric actuators
Electric actuators
Multiturn electric actuators for gate valves
Rotary electric actuators for butterfly valves and ball valves
Linear electric actuators for valves
Pipefittings
Pipefittings
Pipe elbows
Reducers
Tees
Pipe blinds
Pipe caps
Fasteners
Sealing materials
Flanges
Inquiry form

PromArm supplies industrial valves consistent with the following requirements of the Caspian Pipeline Consortium (CPC):



- CPC-50100. Stop valves and check valves with nominal diameters of 250 mm (10 inches) and smaller;

- CPC-95030. Ball valves, wedge gate valves and check valves with nominal diameters of 300 mm (12 inches) and larger, complete with actuators;

- CPC-95019. Pipefittings;

- CPC-50106. Bolts, nuts and gaskets;

- CPC-86001. Painting and outer coatings;

- CPC-50303. Technical requirements for pipeline material classes.


Industrial valves are manufactured in accordance with the requirements of the standard API 6D.


An order for a valve should be stated similar to the following:

“Manually operated true union ball valve constructed of carbon steel with nominal diameter of 20 mm, having operating pressure 16 kgf/cm²; gate leakage class ‘A’ in accordance with GOST 9544-2005; climatic category У (for temperate climates); for underground installation in wells; with anti-corrosive amine-cured epoxy coating consisting of three layers, each one 100 µm thick; operating media is domestic and rainfall runoff with temperatures of +5°С to +35°С”.


“Manually operated rising-stem steel wedge gate valve with nominal diameter 100 mm, having operating pressure 1.6 MPa, with counter flanges, fasteners, spiral-wound graphite filled gaskets and circlips in accordance with GOST P 52376-2005 (Д), compressed thickness 3.2 mm; gate leakage class ‘A’ in accordance with GOST 9544-2005; climatic category У (for temperate climates); for underground installation in wells; with anti-corrosive amine-cured epoxy coating consisting of three layers, each one 100 µm thick; operating media is domestic and rainfall runoff with temperatures of +5°С to +35°С”.


Ball valves API 6D CPC-95030

The item has been added to cart